How to change the blade of a hand blender?

Changing the blade of the hand blender is much easier. You just need to follow some simple steps, and you will be able to change the blade in no time. The first thing that you are going to do is to unplug your hand blender from the power supply to ensure your safety. 

After that, you need to locate the blade and detach it from the blender by loosening all the screws attached to it. Once detached, you can place your new blade in the blender by securing it with the screws.

Make sure the screws are tight enough so that you can be able to start your testing for the blender. Now, let’s see in detail how you can change the blade of your hand blender with ease.

Understanding the Hand Blender Blade:

The blade is actually the most important part of the hand blender. Its main uses are to chop and blend the food, but with time, it will lose its sharpness. Therefore you are going to need to get a new one for the best results.

Assessing the Need for Replacement:

Before you get a new blade, make sure you assess the current condition of the blade that you already have.

If you find your current blade to be corroded, blunt, or wobbling, then you know you need a new one. To get the new blade, you can visit the local manufacturer or any authorized store.  

Gathering Necessary Tools:

Before starting the process of changing the blade, you need to gather some tools. What you are going to need is a clean cloth, a replacement blade, and a screwdriver.

Also, you need to make sure that your new replacement blade is compatible with the design of your hand blender model. 

Preparation and Safety Measures:

If your hand blender is connected to the power supply, make sure to remove it so that you can be safe. If your hand blender was operating recently, chances are it might be hot.

So, give it some time to cool down. Also, put a clean cotton cloth on the countertop so that there is a comfortable space for placing all the disassembled parts.

Disassembly Process:

The first thing that you are going to do is to make sure you have everything that you need for the disassembly process.

Locate the screws through which the blade of your blender was secured. And make sure that you have the right screwdriver for removing the screws.  Loosen all the screws one by one and make sure not to lose them because you will need them later. 

Replacing the Blade:

Once all the screws have been removed,  Carefully remove the old blade from the motor unit. Get the perfect idea about the orientation of your old blade in your hand blender, as it will help you out at the time of reassembly.

Now, you need to place the replacement blade in the same orientation as that of your old blade. After putting it there, you need to take the screws and ensure it won’t get loosened. 

Tightening and Alignment:

It is very important for you to know if the screws are completely tightened to make sure there is no problem of any misalignment of the blade. To check it, you can gently rotate the blade assembly. If it is moving smoothly without resistance, then the blade is perfectly aligned.

Testing and Final Adjustments:

You can do a quick test run to make sure that everything has been done well. For this, You can blend a small quantity of water or any other liquid to see if there are any strange noises that you have not heard before. 

Cleaning and Maintenance:

If you are satisfied with the blade replacement,  remove the hand blender from the power supply, clean all dents and fingerprints from its exterior, and place it in its position.

Also, I advise you to keep your old blade in a safe place for proper disposal and recycling purposes. You can follow local regulations for electronic waste.


Changing the blade of the hand blender is one of the simplest tasks that you can do, but make sure you do it with care so that you are safe and don’t make any mistakes by leaving the screws loosened.

Leave a Reply